Description
4ft Fitted Table Cover
Our 4ft Fitted Table throw is a great addition to your trade show booth, lobby, DJ system or product demo station and is sized to fit any standard 4ft table. FULL COLOR PRINTING. The 3-sided (open back) Table Throw has full length front and side material, with a shorter edge on the backside. Our Fitted Table Throws fit snug around the table. Sewn to fit a 4' Wide, 29" High, 30" Deep table.
LEAD TIME 2 days after artwork approval.
Size:
Height (Front view): 29"
Width (Front view):48"
Graphic Specification:
106"W x 82"H
Construction:
Edges sewn
Finishing:
Dye - Sub Printing
Material: Polyester 300 D
Total Weight:
5lbs pounds
Shipping Dimensions:
10" x 10" x 8"
Our dye-sublimated fitted table covers are manufactured from a flame-resistant, polyester-based fabric. These table covers meet NFPA 701 small-scale safety standards. On a standard table, fabric ends at or just above the floor to create a clean look.
Fabric Care:
Machine wash with cold water. Select the gentle cycle and use a mild detergent, such as Woolite™. Do not use bleach.
Tumble dry on lowest setting to prevent fabric from shrinking. Dryer temperature should not exceed 120°F. Remove immediately to prevent wrinkling.
Wrinkles can be removed from the fabric using an iron (low setting) or a fabric steamer.
Graphic Specs
Additional Information
Product Specification: |
4ft-3sided-FittedTablethrow.pdf |
Product Specification: |
4ft-4sided-FittedTablethrow.pdf |
